• 3-D air outlet design.
  • Easy replacement of motor and fan blades thanks to re-design clamp for block propeller design.
  • Special swing angle design in the modes of cooling and heating for higher comfort.
  • Wireless remote control.
  • Wall control (optional).
  • Only 2 interconnection wires.


Optional CL 98 047
DV inverter
DC fan motor indoor
DC fan motor outdoor
30% efficiency increased

Energetic Efficiency Class “A+++”

8°C heating control

Maintain the room temperature steadily at 8°C and prevent the room from freezing by heating operation when nobody is at home for long in severe weather.

2 ambient sensor

Indoor ambient temperature can be sensed more accurately.

3 sleep mode

Common, default, user-defined.
Mode 1: Indoor temperature automatically rises (when cooling) or drops (when heating).
Mode 2: Featuring unique function, the temperature is automatically adjusted to
be a little lower before you wake up.
Mode 3: You could program your own sleep curve under DIY mode.

Smart zone controller

Possibility to control several units simultaneously from only one remote controller. The smart zone controller can directly control up to 16 indoor units (optional).

7 fan speed

From Super low to Turbo, choose desired fan speed.

Turbo operation

With this function, the air conditioner will maximize the output of cooling or heating capacity, make the room cool down or heat up rapidly, and attain the desired temperature in the shortest time.

<Low ambient cooling

Indoor ambient temperature can be sensed more accurately.

Memory/auto-restart function

If the air conditioner breaks off unexpectedly due to the power cut, it will restart with the previous function setting automatically when the power resumes.

Low temperature dehumidifier

It works under the dehumidification mode even if the temperature is lower than 12°C.

Filter “DustProof”

Eliminate formaldehyde and other volatile organic compounds (VOCs) as well as harmful gases and odors.

Gate card system

Available at a preset port in PCB for the gate card system to be set and connected to this port and work with this function.

2 wired controllers for 1 unit

Wall or remote control (optional).

0.33W standby

Intelligent on-off technology enables products automatically enter energysaving mode when standby, cut energy consumption from normal 4-5W to 0.33W which counts 90% of Memory /Autorestart


The timer can be set to start and stop at any point in a 24-hour period.

Trouble shooting

Error codes are displayed on the indoor panel and wall control.

High efficiency digital PFC control

1% efficieny increased

180°C sine wave inverter technology

Energy Saving.